Close

MD6

Produttori

Ricevitore Multi GNSS u-blox 8 NL-8044P MD6 seriale PPS 10 m Visualizza ingrandito

Ricevitore Multi GNSS u-blox 8 NL-8044P MD6 seriale PPS 10 m

62528

Nuovo

Ricevitore Multi GNSS u-blox 8 NL-8044P MD6 seriale PPS 10 m

Maggiori dettagli

102,47 € tasse incl.

Dettagli

Description 
The MD6 serial multi GNSS Receiver based on u-blox 8 chipset has a built-in antenna for high sensitivity. You can use this GNSS Receiver with a laptop and a suitable routing software for navigation. The MD6 universal connector enables the connection of optional USB or serial connecting cables. The NL-8044P GNSS receiver can be installed onto different vehicle roofs (car, truck, bus etc.) by using the included installation material. Thus it can perfectly fit into the vehicle concept, due to its design.

Specification 
• Connector: MD6 Navilock plug (USB or serial cable are optional available)
• Chipset: u-blox 8 UBX-M8030-KT
• Frequency:
  GPS: L1, 1575.4200 MHz
  GLONASS: L1, 1602 (k x 0,5625) MHz
  BEIDOU COMPASS: B1, 1561.0980 MHz
  GALILEO: E1, 1575.4200 MHz
  QZSS: L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online / offline, SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• Auto Baud Rate up to 115200 bps
• PPS signal on pin 6
• Update rate:
  single GNSS: 18 Hz (e.g. GPS solo)
  multi GNSS: 10 Hz (e.g. GPS+GLONASS)
• Sensibility max. -167 dBm
• IPX7 protection class
• Operating temperature: -20 °C ~ 60 °C
• Power supply: 5 V DC
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS
• Cable length: ca. 10 m
• Dimensions (Ø x H without screw thread): ca. 62 mm x 21 mm

Microsoft Sensor and Location Platform (Website)
• Profit from Windows applications (e.g. weather, maps, etc)
• Supporting the GNSS location platform API (32 bit)

System requirements 
• Windows Vista/7/8/8.1/10, Linux Kernel 2.6
• MD6 connection cable

Package content 
• MD6 serial receiver
• Mounting material: stainless steel nut and washer
• Navilock support CD incl. driver and user manual

Package 
• Box 

Recensioni

Scrivi una recensione!

Ancora nessuna recensione da parte degli utenti.

Scrivi una recensione

Ricevitore Multi GNSS u-blox 8 NL-8044P MD6 seriale PPS 10 m

Ricevitore Multi GNSS u-blox 8 NL-8044P MD6 seriale PPS 10 m

Ricevitore Multi GNSS u-blox 8 NL-8044P MD6 seriale PPS 10 m

11 altri prodotti nella stessa categoria

Close