Close

TTL

Produttori

Modulo industriale ricevitore GNSS u-blox 8 NL-852ETTL PPS u-blox 8 Visualizza ingrandito

Modulo industriale ricevitore GNSS u-blox 8 NL-852ETTL PPS u-blox 8

62571

Nuovo

Modulo industriale ricevitore GNSS u-blox 8 NL-852ETTL PPS u-blox 8

Maggiori dettagli

70,16 € tasse incl.

Dettagli

Description 
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses TTL 3.30 V.

Specification 

• Connector: WTB serial TTL
• Chipset: u-blox 8 UBX-M8030-KT
• Frequency:
    GPS: L1, 1575.4200 MHz
    GLONASS: L1, 1602 (k x 0,5625) MHz
    BEIDOU COMPASS: B1, 1561.0980 MHz
    GALILEO E1, 1575.4200 MHz
    QZSS L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online/offline,
  SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• USB specification 2.0
• Auto Baud Rate up to 115200 bps
• Update rate:
    single GNSS: 18 Hz (e.g. GPS solo)
    multi GNSS: 10 Hz (e.g. GPS+GLONASS)
• Sensitivity: –167 dBm
• LED-indicator for GPS-status
• Operating temperature:
    -40 °C ~ 85 °C without battery
    -20 °C ~ 60 °C with battery
• Power supply: 5 Volt
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy:
    2.5 m CEP (Circular Error Probable) and
    2 m CEP with SBAS
• Dimension (LxWxH): ca. 30 x30 x 7.90 mm



System requirements 
• Device with free TTL input.

Package content 
• GNSS module
• Navilock support CD

Package 
• Poly bag

Recensioni

Scrivi una recensione!

Ancora nessuna recensione da parte degli utenti.

Scrivi una recensione

Modulo industriale ricevitore GNSS u-blox 8 NL-852ETTL PPS u-blox 8

Modulo industriale ricevitore GNSS u-blox 8 NL-852ETTL PPS u-blox 8

Modulo industriale ricevitore GNSS u-blox 8 NL-852ETTL PPS u-blox 8

5 altri prodotti nella stessa categoria

Close