Close

USB

Produttori

Modulo Industriale ricevitore Multi GNSS u-blox 8 NL-852EUSB PPS Visualizza ingrandito

Modulo Industriale ricevitore Multi GNSS u-blox 8 NL-852EUSB PPS

62575

Nuovo

Modulo Industriale ricevitore Multi GNSS u-blox 8 NL-852EUSB PPS

Maggiori dettagli

64,94 € tasse incl.

Dettagli

Description
GNSS modules are fully assembled receiver with patch antenna, backup battery etc .. This version uses USB 2.0.

Specification 
• Connector: WTB USB 2.0
• Chipset: u-blox 8 UBX-M8030-KT
• Frequency:

    GPS: L1, 1575.4200 MHz
    GLONASS: L1, 1602 (k x 0,5625) MHz
    BEIDOU COMPASS: B1, 1561.0980 MHz
    GALILEO E1, 1575.4200 MHz
    QZSS L1, 1575.4200 MHz
• Accepts the signals of up to 72 satellites at the same time
• Supports AssistNow online/offline,
  SBAS (WAAS, EGNOS, QZSS and MSAS)
• Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG
• USB specification 2.0
• Auto Baud Rate up to 115200 bps
• Update rate:
    single GNSS: 18 Hz (e.g. GPS solo)
    multi GNSS: 10 Hz (e.g. GPS+GLONASS)
• Sensitivity: –167 dBm
• LED-indicator for GPS-status
• Operating temperature:
    -40 °C ~ 85 °C without battery
    -20 °C ~ 60 °C with battery
• Power supply: 5 Volt
• Current consumption: max. 45 mA
• Cold start in ca. 26 seconds
• Hot start in ca. 1 second
• Positioning accuracy:
    2.5 m CEP (Circular Error Probable) and
    2.0 m CEP with SBAS
• Dimension (LxWxH): ca. 30 x30 x 7.90 mm

System requirements 
• Device with free USB 2.0 input

Package content 
• GNSS module
• Navilock support CD

Package 
• Retail Box 

Recensioni

Scrivi una recensione!

Ancora nessuna recensione da parte degli utenti.

Scrivi una recensione

Modulo Industriale ricevitore Multi GNSS u-blox 8 NL-852EUSB PPS

Modulo Industriale ricevitore Multi GNSS u-blox 8 NL-852EUSB PPS

Modulo Industriale ricevitore Multi GNSS u-blox 8 NL-852EUSB PPS

2 altri prodotti nella stessa categoria

Close